Bati wood is a kind of natural antiseptic hardwood, which will not deform and fade. It is more waterproof and insect proof, and has a smooth and beautiful appearance. It can replace the red iron wood.

Processability and use

Bati wood has luster. The texture is out of place. The structure is fine to slightly thick; the material is medium to heavy; the strength is slightly higher; the shrinkage is large. Good processing performance; adhesive and polishing agent must have good performance; nails need to be drilled first. Very corrosion resistant. Dry slowly, easy to crack, slightly deformed. Bati wood is a kind of natural antiseptic hardwood, which will not deform and fade. It is more waterproof and insect proof, and has a smooth and beautiful appearance. Suitable for outdoor floor, garden landscape, outdoor wood preservative, interior floor, high grain furniture, interior decoration, doors and windows, cabinets, vehicles and bridge, etc.

Texture appearance, interlaced wood texture, beautiful patterns.

Good processing performance, good processing performance

Stability, slow drying, easy to crack and slight deformation

Coating performance, adhesive, polishing agent, properties of substrate to be filled

Rare, resources gradually reduced

Advantages of batik furniture:

Hardwood, high density, natural anti-corrosion, anti-corrosion life up to 50 years.

Good stability, not easy to crack, small shrinkage, etc. (but the material should not be too long)

Mild color, beautiful texture, easy to paint.

Disadvantages of batik furniture:

Bati wood floor has high requirements for installation. Once it is installed improperly, it will cause a series of problems.

After paving, it is usually waxed and oiled, otherwise the gloss of the Batti surface will soon disappear.

Basic introduction

Batty is a yellowish brown wood with pores. The tube hole is obvious in the naked eye, slightly small, slightly larger; it is mainly single tube hole, with few diameter holes (2). It contains yellowish brown sediments and intrusions. The axial parenchyma under the magnifying glass was slightly visible, sparse and annular, and was slightly dense and narrow under the wood ray magnifying glass.

Distribution range

It is distributed in tropical Asia, Africa and Oceania. The species is mainly imported from Equatorial Guinea, Liberia, Cameroon, Gabon and Congo.

Wood morphological characteristics: 1

colour

The difference between heartwood and sapwood is obvious. The heartwood is dark yellow to orange. Sapwood is light yellow or yellowish white, about 4 cm wide.

grain

The growth round is not obvious. The texture is interlaced and the structure is fine to slightly thick.

The bark is 1-3cm thick, soft and easy to peel off. The outer skin is grayish brown to grayish white; the outer skin is grayish white. It has a thin turtle. The endothelium is yellowish brown; the phloem fiber is developed and easy to tear into loose needle or hemp filament; the stone cell is developed.

Huanghua pear: Heartwood reddish brown to dark reddish brown or purple reddish brown, with uneven shadows, usually with dark brown stripes, sapwood grayish yellow brown or light yellowish brown. Wood grain or hidden or exist, vivid and diverse, like wheat ear, crab claw shape, to carefully observe whether the texture is clear, natural, smooth. The wood is hard, the hands feel warm, and they don't feel rough and strong. The new cut pieces have a pungent and pungent flavor, which can be retained for a period of time and emit a light aroma. Batumi: the endothelial cells are yellowish brown. The phloem fiber is developed and easy to be torn into pine needle or hemp. The heartwood is dark to orange. The texture is interlaced.